AMTStandards.orgAviation maintenance

AF-C Airframe

Flight Controls

What to read

  1. Concepts Everything here is about flutter 8 sections
    Sections
    1. §1 K9 — flutter, and why it is the reason for the unit
    2. §2 Cable work: taught in GEN-E, applied here
    3. §3 Cable tension is a temperature-dependent measurement
    4. §4 R4 is about our equipment, and it is unusual
    5. §5 Rigging is a system, not a set of adjustments
    6. §6 R3 — lifting a component into place
    7. §7 What consumes this unit
    8. License
  2. Procedures Cables, surfaces, rigging 8 sections
    Sections
    1. Proc. 1 Inspect control cables (S5)
    2. Proc. 2 Measure cable tension (R1, R5, supporting S6)
    3. Proc. 3 Adjust and secure a cable (S6)
    4. Proc. 4 Remove and reinstall a control surface (S4)
    5. Proc. 5 Check and adjust control surface balance (S8, S11)
    6. Proc. 6 Rig a control system (K10, S1, S13, S7)
    7. The checks, collected
    8. License
  3. Quick reference Flight Controls 2 sections
    Sections
    1. The operative sources
    2. License