Fundamentals of Electricity and Electronics

What to read

1. Concepts What you can destroy, and how to find a fault 8 sections
   Sections of Concepts

   1. §1 Why digital electronics is in a maintenance standard
   2. §2 Ohm's law is a prediction, not a formula
   3. §3 Voltage drop is the measurement that finds real faults
   4. §4 S8 is the only simulator element in General, and it is worth watching
   5. §5 Batteries are the hazard in this unit
   6. §6 The largest station load in General needs no apparatus
   7. §7 What consumes this unit
   8. License
2. Hands-on First hours with a meter 8 sections
   Sections of Hands-on

   1. Sess. 1 Predict, then measure
   2. Sess. 2 Series and parallel, until the arithmetic is intuition
   3. Sess. 3 The two ways to destroy a meter
   4. Sess. 4 Build a fault, then find it
   5. Sess. 5 Resistance in isolation
   6. Sess. 6 Static discipline, which has no feedback
   7. What you should be able to do at the end
   8. License
3. Procedures Measuring circuits 11 sections
   Sections of Procedures

   1. Proc. 0 Before the probes touch anything
   2. Proc. 1 Continuity test (S1)
   3. Proc. 2 Measure voltage (S2)
   4. Proc. 3 Measure current (S3)
   5. Proc. 4 Measure resistance (S4)
   6. Proc. 5 Voltage drop test (S11) — the one that finds faults
   7. Proc. 6 Test for shorts and opens (S10, S12)
   8. Proc. 7 Service a battery (S14)
   9. Proc. 8 Read a diode or a logic gate on a diagram (S7)
   10. The checks, collected
   11. License
4. Quick reference Fundamentals of Electricity and Electronics 3 sections
   Sections of Quick reference

   1. The operative sources
   2. The relationships
   3. License