AMTStandards.orgAviation maintenance

AF-K Airframe

Aircraft Electrical Systems

What to read

  1. Concepts It is mostly about wire 8 sections
    Sections
    1. §1 Generation is six elements; wire is twelve
    2. §2 R8 — soldering, and the thing candidates get backwards
    3. §3 Nine risk elements, and four of them are one rule
    4. §4 S9 — the one place you size something
    5. §5 Shielding, bonding and lightning are one idea
    6. §6 Routing is where the delayed failures come from
    7. §7 What consumes this unit
    8. License
  2. Hands-on Terminating, worked over weeks 8 sections
    Sections
    1. Sess. 1 The crimp, and why the tool matters
    2. Sess. 2 Stripping without nicking
    3. Sess. 3 A connector, start to finish
    4. Sess. 4 Lacing and bundling
    5. Sess. 5 Soldering, and the stress riser
    6. Sess. 6 Bonding, measured
    7. What to send back
    8. License
  3. Procedures Terminating, routing, protecting 10 sections
    Sections
    1. Proc. 0 De-energize, and know what is near you (R1–R4)
    2. Proc. 1 Determine the electrical load, and size the wire from it (S9, R6)
    3. Proc. 2 Strip and terminate (S2)
    4. Proc. 3 Splice (S2)
    5. Proc. 4 Assemble a connector (S3)
    6. Proc. 5 Solder, where it is called for (S5, R8, R9)
    7. Proc. 6 Route and secure a bundle (S8, R5)
    8. Proc. 7 Install a bonding jumper (S10)
    9. The checks, collected
    10. License
  4. Quick reference Aircraft Electrical Systems 2 sections
    Sections
    1. The operative sources
    2. License