Reciprocating Engines

What to read

1. Concepts The propeller will start the engine 8 sections
   Sections of Concepts

   1. §1 R1 — treat every propeller as live
   2. §2 The four-stroke cycle explains almost everything else
   3. §3 Detonation and pre-ignition are different, and both destroy pistons
   4. §4 R3 — an engine fire during start, and the counter-intuitive answer
   5. §5 Two engine articles are needed, and they cannot be the same engine
   6. §6 Cylinder installation is a torque sequence, not a bolt-up
   7. §7 What consumes this unit
   8. License
2. Procedures Working on a reciprocating engine 8 sections
   Sections of Procedures

   1. Proc. 0 Before you touch the propeller (R1)
   2. Proc. 1 Locate top dead center, number one cylinder (S8)
   3. Proc. 2 Cylinder assembly inspection (S1)
   4. Proc. 3 Install a piston and wrist pin (S3)
   5. Proc. 4 Install a cylinder (S9)
   6. Proc. 5 Operate and troubleshoot an engine (S2, R2)
   7. The checks, collected
   8. License
3. Quick reference Reciprocating Engines 2 sections
   Sections of Quick reference

   1. The operative sources
   2. License