Cleaning and Corrosion Control

What to read

1. Concepts Corrosion is a circuit 10 sections
   Sections of Concepts

   1. §1 Anode, cathode, electrolyte, path
   2. §2 This unit is two subjects, and they join at surface preparation
   3. §3 Dissimilar metals, and what a barrier actually does
   4. §4 R3 and K11 — the cleaner that causes the damage
   5. §5 Why surface preparation decides how long a finish lasts
   6. §6 Eight risk elements, and the one a school forgets
   7. §7 Detection before treatment
   8. §8 No element requires a paint booth
   9. §9 What consumes this unit
   10. License
2. Procedures Inspecting, treating, preparing 10 sections
   Sections of Procedures

   1. Proc. 0 Establish the chemical and the material (R3, R4)
   2. Proc. 1 Perform a corrosion inspection (S1, S5)
   3. Proc. 2 Remove and treat corrosion (K7, supporting S1)
   4. Proc. 3 Apply corrosion-preventive compound (S3)
   5. Proc. 4 Prepare a metal surface for painting (S11)
   6. Proc. 5 Apply etch solution and conversion coating (S13)
   7. Proc. 6 Prepare a composite surface for painting (S8)
   8. Proc. 7 Lay out and mask a surface (S10, with S7)
   9. The checks, collected
   10. License
3. Quick reference Cleaning and Corrosion Control 5 sections
   Sections of Quick reference

   1. Corrosion
   2. Finishing
   3. Risk
   4. The operative sources
   5. License