Source: FAA-H-8083-32B, lubrication systems chapter. Public domain. Pointers only.
Chapter and section verified against FAA-H-8083-32B, 2023 edition, on 28 August 2026. Page numbers are deliberately not cited: they move between printings, and a citation that rots silently is worse than a coarser one that stays true. Checked by our handbook citation check against our index of the handbook's chapters and sections.
| Elements | The ACS asks for | Where in FAA-H-8083-32B | Read it for |
|---|---|---|---|
K1, R1, S2, S4 |
Oil types, grades and uses; mixing oils; correct oil for an engine; oils by climate | Ch. 6 — Functions of Engine Oil; Recommendations for Changing Oil | Mineral against ashless dispersant, and break-in. PP-G Concepts §3 |
K2–K4, S8, S10 |
System operation and components; wet-sump; dry-sump | Ch. 6 — Wet-Sump Lubrication System Operation; Dry Sump Lubrication System Operation; Dry Sump Oil Systems; Oil Pump; Oil Tank; Pressure & Scavenge Oil Screens | Where problems appear — PP-G Concepts §4 |
K5, S14 |
Chip detectors | Ch. 6 — Magnetic Chip Detectors | PP-G Concepts §1 |
K6, S5, S6, S13 |
Maintenance, inspection, servicing and analysis; oil sampling; filter and screen inspection; metal identification | Ch. 6 — Oil & Filter Change & Screen Cleaning; Oil Filter/Screen Content Inspection; Spectrometric Oil Analysis Program; Turbine Engine Oil System Maintenance | PP-G Concepts §1 — the debris is the diagnosis |
K7 |
Excessive oil consumption | Ch. 6 — Troubleshooting Oil Systems | Rings, guides, or leakage — the diagnosis differs |
S1, S3 |
Oil cooler and lines; turbine filter bypass indicator | Ch. 6 — Oil Cooler; Oil Cooler Flow Control Valve; Turbine Oil Filters | A popped bypass indicator is a finding |
S7, S9, S11, S12 |
Oil pressure adjustment; component replacement; troubleshooting pressure and temperature | Ch. 6 — Oil Pressure Regulating Valve; Oil Pressure Relief Valve; Troubleshooting Oil Systems | PP-G Concepts §5 |
R2 |
Departing from manufacturer recommendations | — | GEN-I Concepts §3 |
R3 |
Handling, storage and disposal of used oil | Ch. 6 — Turbine Oil Health & Safety Precautions | PP-G Concepts §6 |
The operative sources
- The engine manufacturer's approved oil list and seasonal grade table, and the break-in instructions. Which oil, and when, is theirs.
- The oil analysis laboratory's reference data where a program is in use.
License
CC BY-SA 4.0 (Licensing).